39 3vze intake manifold diagram
Tuesday, September 30th, 2014 AT 7:01 AM. HMAC300. EXPERT. Here they are: intake manifold-11'# 15Nm. Throttle body- 14'# 19Nm. Air intake chamber bolt/nut-32'# 43Nm. Air intake chamber support bolt 14'# 19Nm. See picture for intake sequence and no plenum given so am assuming they are calling it air intake chamber (below) I replaced my 3VZE head gaskets in 2001 and, not having any experience to cause me to question the factory torque specs, that's what I used on the caps and on the intake manifold. (I just checked my factory manual and the torque specs you quoted are the same and are what I used.) The exhaust manifold has also been changed. The firing order for the 3VZ engines is 1-2-3-4-5-6. This engine is installed under the hood of the vehicles with 15ยบ tilt. All these modifications and changes yielded 3 liter of displacement and output of 185 HP at 5,800 rpm, 256 Nm of torque at 4,600 rpm. Toyota 3VZ-FE engine was being produced ... 3vze intake manifo...